Your UT Report Tells a Story. We Translate It Into a Repair Plan.
Steel Renewal Is the Most Expensive Option. It Does Not Have to Be Your Only One.
Your UT report comes back showing 15-30% wastage across large sections of deck. The surveyor flags it. The drydock quotes steel renewal — cutting out plate, welding in new steel, re-coating the entire area. The bill comes in six figures. The vessel sits idle for weeks.
Meanwhile, 90% of those flagged areas still have steel well above minimum allowable thickness. They need repair, not replacement.
Boat owners across the Pacific Northwest are using ABS-approved Belzona systems to repair localized corrosion and pitting — cold-applied, no hot work, no welding. Steel renewal only where the plate is actually below minimum thickness.
The result: targeted repairs on the 5-10% of deck that needs it, your standard non-skid system over the top, and a vessel back in service faster at a fraction of the cost.
What Will Your Deck Look Like at the End of Your Drydock Cycle?
Every drydock, owners face the same choice on weather decks — and every owner has an option. Deck protection works as a system: every step matters, and each step depends on the one before it. Belzona goes first, rebuilding the substantially corroded areas back to original profile and stopping future corrosion at the source. A full deck coating system goes second, protecting the entire surface against corrosion and wear that caused the damage in the first place. The deck system matters, and we can help with the entire system. What do your decks look like after 3-4 years of service?
Upload your ultrasonic thickness data and our team will deliver an interactive deck analysis with color-coded corrosion mapping, ABS compliance assessment, and Belzona product recommendations — within 24 hours.
What You Get
Every analysis includes an interactive report your team can use throughout the repair process — not just a static PDF.
Interactive Corrosion Map
Color-coded vessel profile showing every UT measurement. Toggle between position numbers, percent loss, and minimum readings.
ABS Compliance Assessment
Every position classified against ABS maximum allowable wastage thresholds. Steel renewal zones clearly identified.
Belzona Product Recommendations
Each procedure is written specifically for the areas identified in your UT report, ready for submission to ABS or any other classification society.
Zone-by-Zone Breakdown
Deck areas ranked by severity with average and maximum wastage. Prioritize your drydock budget where it matters most.
Localized Repair Specification
Belzona product requirements and QA inspection points for the 5-10% of deck area that needs repair, ready for your deck coating contractor.
Permanent Secure Link
Your analysis lives on a private, secure URL. Share it with your surveyor, fleet manager, or drydock team.
How It Works
Send Your UT Report
Use the form below or email us directly at solutions@belzonatnw.com. We accept PDF, Excel, or any common report format.
We Analyze and Call You
Our team reviews your data, classifies every reading against ABS thresholds, and calls you to discuss findings and your timeline.
Receive Your Interactive Report
Within 24 hours you get a private link to your vessel's interactive analysis — the same tool you see in the sample above.
Request Your Deck Analysis
Send us your UT report and we will respond with a full interactive analysis within 24 hours.
This analysis is provided as a guide for planning purposes. All repair decisions should be verified by a qualified marine surveyor and approved by the vessel's classification society prior to execution.
Belzona Technology Northwest — Exclusive Authorized Distributor — Washington, Oregon, Alaska, and Northern Idaho